Medical Gloves Protective Equipment

Medical gloves is a high-quality natural latex as the main raw material, through the use of coagulant impregnation method for mold processing, drying made of rubber film products, the product is divided into a hand for a medical operation.

Medical gloves are generally used as protective products for medical surgery. It protects the hands of the surgeon from the skin and is not damaged and infected, and prevents the operator's body from intruding into the bacteria and dirt carried by the surgeon.

Medical Gloves Protective Equipment

1 Overview

Medical gloves is a high-quality natural latex as the main raw material, through the use of coagulant impregnation method for mold forming, drying made of rubber film products. The product is divided into hand for a medical operation.

2. use

Medical gloves are generally used as protective equipment for medical surgery. It protects the skin and is not damaged and infected by the surgeon, and prevents the operator's body from being immersed in the bacteria and dirt carried by the surgeon.

3. The main production and exports to countries and regions

China's production of export latex inspection gloves origin are mainly distributed in: Shanghai, Tianjin, Jiangsu, Guangdong and other places, the products are sold to the United States, Canada and Western Europe and other places.

4 Test method:

① glove weight, according to the provisions of GB7543-96 only by the film inflated, about twice the expansion of the case with manual inspection. Wrist parts can be stretched by hand stretching method (finger does not generally expand), if found to be defective, can be doubled in the local expansion to check.

② The length of the glove (the total length of the middle finger tip to the vertical direction of the wrist) and the width (1/2 of the circumference of the palm of the thumb) are measured by the mm scale.

③ Thickness is measured with a thickness of 0.01mm rubber thickness of the double layer thickness, and then calculate the thickness of a single layer. (The center of the center), the wrist (about 25mm from the edge) 3 points to take the arithmetic mean, but the thinnest thickness of the thickness shall not be less than the thickness of the thickest 1/2

④ glove physical and mechanical properties of the test method must be implemented in accordance with the following standards.

HG4-874-84 "General requirements for physical and mechanical properties of latex products"

HG4-875-84 "Test method for tensile properties of latex products"

HG4-876-84 "Latex products hot air aging test method"

GB / T14831-93 "latex products vapor aging test method" 5. Chemical composition

The test of chemical composition of gloves mainly refers to the inspection of raw materials and auxiliary materials, such as natural latex, ZnO, EZ, antioxidant 1 # and anti-aging agent 2 #, the specific test method in accordance with the "latex industrial raw materials and test methods compilation" The

6. Packaging and storage

Disinfection gloves must be packaged with a composite film to prevent the impact of disinfection. Please pay attention to avoid moisture when the transport, rain to prevent damage to the way.

7. Production Notes

The product production equipment continuity, production capacity. So the production must be mass production, generally a variety of at least to produce hundreds of thousands to ensure the control process, reduce losses and improve quality. At the same time to adhere to the first production, the first sale of the principle, to avoid inventory time is too long, affecting quality.